niclaskarlsonphoto-2399_edited.jpg

SKIS
CONSTRUCTION

 

TECHNICAL INFORMATION

Passion, innovation et creativity are the DNA of MOVEMENT.

Our R&D team is constantly working inclose collaboration with our team, to offer more and more pleasure and new perspectives in the practice of skiing.Each new project is modelled in 3D and then prototyped in our laboratory in the Swiss Alps. It then undergoes a battery of mechanical tests, the results of which are compared with our skiability criteria. After adjustments, the ski is tested in real conditions by our team.Their precious advice will guide the final adjustments before going into production.

«Because you are never better served than by yourself, Movement has its own production unit in Tunisia.»

80 perfectly orchestrated operations and more than fifteen, carefully selected, materials are necessary for the production of a Movement ski. For more than 40 years, this know-how has enabled us not only to guarantee the highest quality standards but also to produce our technologies in complete independence.

Pushing the limits, breaking codes and making the first tracks... this is our definition of innovation.

SKIS
TECHNOLOGY

FLY TWO SERIES 

POPLAR
FIBER
TOPSHEET
DPR.png
EDGE_Alpine.png
FLY TWO 105
WOODCORE_Poplar.png
BASE_PTEX3000.png
FLY TWO.png
BASE
EDGE
RUBBER
BASE
EDGE
TITANAL
KARUBA
FIBER
TOPSHEET
GO 106
TITANAL_PowerPlates.png
BASE_PTEX4000.png
WOODCORE_Karuba.png
GO.png

GO SERIES

EDGE_Alpine.png
DPRti.png

ALP TRACKS SERIES

TOPSHEET
CARBON
KARUBA LIGHT
EDGE
BASE
ALP TRACKS 95
CONSTR_ALP TRACKS.png
CARBON_Full.png
EDGE_Race.png
BASE_PTEX5000.png
WOODCORE_UltraLight.png
DPRti.png
ALP TRACKS.png

SESSION SERIES

EDGE
BASE
CARBON_5Axis.png
BASE_PTEX4000.png
WOODCORE_Karuba.png
SESSION 95
TOPSHEET
CARBON
KARUBA
SESSION.png
EDGE_Touring.png
DPRti.png

AXESS SERIES

BASE
CARBON_2Axis.png
DPRti.png
AXESS 92
EDGE_Touring.png
BASE_PTEX4000.png
WOODCORE_Karuba.png
EDGE
FIBER
KARUBA
2 AXIS CARBON
TOPSHEET
AXESS.png

RACE PRO SERIES

RACE PRO.png
BASE_PTEX5000.png
CARBON_Full.png
RACE PRO 66
WOODCORE_UltraLight.png
TOPSHEET
CARBON
LIGHT KARUBA
FIBER
EDGE
BASE
EDGE_Race.png
DPRti.png
TOPSHEET
2 AXIS CARBON
FIBER
KARUBA
EDGE
BASE
REVO.png
REVO 86
EDGE_Alpine.png
BASE_PTEX4000.png
WOODCORE_Karuba.png

REVO SERIES

CARBON_2Axis.png
TITANAL_PowerPlates.png

TECHNICAL SPECIFICATIONS

WOOD CORE

We only use wood cores that are certified FCS and PEFC (www.fcs.org, www.pefc.org). Every core is chosen to match the type of ski being produced.

BASE

Our bases are top quality sintered bases with high molecular density. We use 3 different P-Tex bases through out the range which are carefully chosen to match the individual ski.

EDGE

We use four different thickness and profiles of the edge throughout the range. Rent skis benefit from a specific and wider edge.

ABS SHOCK ABSORBER

The ASA system (ABS shock absorber) is situated in the underfoot area of the ski to act as a shock absorber.

DPRti.png

REINFORCEMENT PLATE

A system of two fiberglass (TI : one fiberglass and one titanal) layers completely integrated under the bindings to guarantee a perfect anchorage of the screws. 

CARBON FIBER

A new technology specifically developed for the ski touring range. A ski and its performance are characterized by weight and skiability. We have worked on the carbon filament as well as the fiberglass which surround the wood core.

DOUBLE TITANAL PLATE

Two titanium plates are completely integrated (on the upper and lower part of the ski) in the wood core construction in order to guarantee stability and performance when skiing.

CHECK CONTROL

There are quality control checks to measure the ski’s weight, flex and the straightness after the production and before the packaging. The prime concern is to build the most perfect and balanced ski.

CARBON FIBER

CARBON_2Axis.png

2 carbon axes: This reduces weight and increases performance in difficult snow conditions. Partial torsion-resistant and perfect comfort in general. 

5 carbon axes: To minimize the weight and maximize the performance in any kind of snow condition. More responsive with a high level of performance as well as perfect edge grip on hard snow or on steep slopes due to a torsion locking system. 

100% carbon: In complement to the combination of a mix of five high density carbon fibers axes on the ALP TRACKS range, a 100% unidirectional carbon laminate is put on the upper part and lower part of the ski. With this construction the torsion locking system of the ski is optimal and guarantees an exceptional glide in the turn and perfect grip even in very hard snow conditions, something few skis have achieved. There is also a significant reduction in weight. 

CARBON_5Axis.png
CARBON_Full.png

SHAPES

SHAPES_edited.png
CLASSIC
ROCKER
TWIN ROCKER
FREESTYLE
TWIN ROCKER
FULL ROCKER